Eagles Multifunctional Network Tester,Telephone Line Tester,RJ45 Network Engineering Tester,Network Cable Tester Line Measuring Tool,RJ45 RJ11 RJ12 UTP LAN Cable Tester Networking Too

Specification: Test cable: BNC, RJ11, RJ45 Power: DC 9V laminated battery Power consumption: 25MA Volume: 10.5*10.5*2.6 mm Weight: 150G Automated scanning, fast testing, streamlined shape, ergonomic design. Smooth and simple lines, anti-drop, and light-proof design, more in line with on-site construction Features: 1. Test the twisted pair 1, 2, 3, 4, 5, 6, 7, 8, G pairs one by one (pair) and distinguish which one (pair) is wrong, short and open. 2. Switch ON is the normal test speed, "S" is the slow test speed, and M is the manual speed. Twisted pair test: turn on the power and plug the network cable plug into the main tester and remote tester respectively. The host indicators flash from 1 to G one by one. If the wiring is not normal, it will be displayed as follows: 1. When there is a network cable such as Line 3 disconnected, the main tester and the remote test terminal No. 3 lighting are not bright 2. When there are several lines that are not connected, several lines are not bright. When the network line is less than 2 lines, the lights are not bright. 3. When the two network cables are out of order, the example 2, 4 lines are out of order, the following is displayed: the main tester does not change: 1-2-3-4-5-6-7-8-G the remote test terminal is: 1-4-3-2-5-6-7-8-G 4. When there are 2 short circuits on the network cable, the main tester will not light up, and the two test lights on the remote test terminal will be slightly brighter. If there are more than 3 (including 3)when short circuited, all the short-circuited numbered lights are not lit. If the patch panel and wall mount module are tested, two matching jumpers (such as 110P4-RJ45) are required to lead to the tester Package include: 1 x Network Tester