E-SDS 4K HDMI Surge Protector,Mini Portable HDMI in-Line Surge Protector for ESD,EFT and Lighting Surge Protection,Support HDMI1.4 and HDCP

This HDMI Surge Protector protects HDMI devices against Cable Discharges, Electrostatic discharge and Lightning as the clock within the HDMI technology is very susceptible to surge damage. It has a passive design and no power supply is supplied so surges cannot blow the HDMI Surge Protector out. HDMI Surge Protector Installation Tips: 1?To connect the HD Source with the HDMI input port of the HDMI surge protector 2?To connect the HD Display with the HDMI output port of the HDMI surge protector. 3,Grounding:The protector provides elecrical isolation even if it is ungrounded. However, to get the best protection we recommend that you ground the surge protector with the included ground wire or some other option to provide an earth path. The grounding wire can be attached to the mounting loops on the front of the unit, or by securing it under one of the chassis screws. Attach the other end to a ground point on your video equipment, a UPS, a grounding bus bar, or to a grounded/bonded equipment rack. (If none of those are available, you can often use a chasis screw of equipment that uses a three-pronged, grounded power cable). HDMI resolution: 24/ 50/ 60fs/ 1080p/ 1080i/ 720p/ 576p/ 576i/ 480p/480i/4K2K30Hz Support video color format: 24bit/deep color 30bit,36bit, 48bit Max bandwidth: 340MHz Max baud rate: 10.2Gbps Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL) Input/Output DDC signal: 5Volts p-p (TTL) Max working current: 50mA Operating Temperature range: (-15 to +55?) Operating Humidity range: 5 to 90%RH (No Condensation) Package Contents 1 x HDMI Surge Protector 1 x Manual 1 x Ground Wire 2 x Ground Screws