DZS Elec DC-DC Buck Converter Module 5_3-32V 24v to 1_2-32V 5v 9v 12v 12A 160W Large Power Adjustable Step Down Voltage Regulator CC CV Power Supply with LCD Display

Product Description: Step-down constant voltage constant current converter module, can be used as an ordinary step-down module with over-current protection, as a battery charger, charging battery/lithium battery, etc., as a large power LED constant current drive module, driving high-current and high-power load, etc. Parameter: Input Voltage: 5.3-32V (Minimum input 4V to achieve voltage reduction, If the input voltage is less than 5.3V, measurement is not accurate. ) Output Voltage: 1.2-32V (The output voltage must be lower than input voltage, Minimum dropout voltage is 0.8V) Output Current: 8A for long time stable work, can be up to 12A after enhancing heat dissipation. Output Power: 120W(Within 8A) in natural heat dissipation, up to 160W after enhancing heat dissipation. Voltage Display Resolution: 0.05V, Range 0-32V Current Display Resolution: 0.01A, Range 0-12A Transfer Efficiency: Approx. 96% Working Current: Approx. 25mA Output Indicator: Constant current indicator light, output indicator light Soft Start: YES (High power load module may fail when started) Input Reverse Protection: YES Output Anti-Backflow: NO (If charging the battery, power up the module before connecting the battery, and make sure the battery voltage is lower than the output voltage.) Short Circuit Protection: YES Size: 82x52x32mm (LxWxH) Constant Current Mode: CC sets the potentiometer for the current and rotates clockwise to increase the setting current and counterclockwise to reduce it. When the load current reaches the set current, it enters the constant current state and CC constant current indicator (red) lights up. Package Include: 1pc 12A LCD Step-Down Power Converter Module