Dual Dash Camera for Cars Dash Cam Front and Rear 1080P Full HD Car Recorder 4 Inch IPS Screen 170°Wide Angle,Super Night Vision,WDR,Motion Detection,Loop Recording,G-Sensor,Parking Monitoring

What you should attention: ?The internal battery is small capacity for backup only. You need plug the car charger while use it; ?Please format SD Card (Not Included, Class 10, 32GB max SDHC card) on your dash cam before using; SD card is not included, please purchase a memory card separately. ?It require a name band Class10 or higher micro SD card,Format your SD card on the camera first before using. ?Record Do not remove the TF card during the recording process. ?For cleaning, wipe gently with a soft cloth. Do not use any chemicals for cleaning. ?In case of overheating, unwanted smoke or unpleasant smell from the device, unplug it immediately from the power outlet to prevent hazardous fire. ?More attention you can see user manual. How to install: Remove dirt from the windshield and bracket suction cups before installing the bracket. 1. Install the suction cup on the camera. 2. Place the suction cups in parallel on the windshield of the car. 3. Press the suction cup firmly against the windshield and push the bracket down firmly 4. Plug the USB car charger into the cigarette lighter socket of the car. 6. Wiring the USB cable along the car's gaps. 7. Place the end of the USB cable a few turns on the rear view mirror to prevent the recorder from falling. 8. Plug the Micro USB head of the car charger into the camera's USB port 9. Adjust the camera to an appropriate angle to ensure that the front of the car is visible from the camera screen. How to install the rear camera Connect the rear camera's Terminal (2.5 mm diameter) directly to the AV IN port of the camera. The red cable is the power cord used to illuminate the rear camera LEDs. Tips: Please format SD Card ( class 10, 32GB max SDHC card) on your dash cam before using;