High quality 3D vision decorative night light ,creative dual color with 7 times changing with remote control
Optical Acrylic flat panel with laser engraving create amazing 3D visual effect.
Smart remote control,control this smart bulb by both touch button or remote control
Voltage:5V
Power: 0.5W
Material: Acrylic & ABS
Weight: 0.35kg
Powered By:USB(Adapters are not included) or 3AA battery
Base:Touch+Remote
7 Colors Change(Red+Green,Purple+Cyan,Blue+Purple,Red+Yellow,Purple+Blue,Blue+White, Purple+White)
How to use:Supported by 3 pcs AA battery or USB cable.Just remove two side protective layer in the acrylic then insert it to the base, plug in, and then touch the power button to light it up,the 3D effect enhance when there is only light in a dark room
Touch button:press once,one color lights up,press again,another color lights up,and after touching it seven times, the light starts to automatical changing color,and the light is off after touch the point 2s
Energy saving. Power spend: 0.012kwh/24 hours; LED lifespan: 10000hours
Package Includes:
1x Acrylic Plate
1x ABS Base
1x USB cable
1x Remote control
Notice:
1.Please tear up protective film before use to make the light clear, you can placed it in warm water for half an hour, then the protective film will be easier to tear off
2.In order to make the remote work normally, Make sure to take paper off back from Bottom of remote
3.If you want to plug in the outlet instead of charge with USB Data line interface,will need a adaptor to plug USB charger into outlet.(there is not adaptor included in our product)
4.Plug in power source to turn on the light ,if you want to turn off the light ,you can touch
