Double Head Metal Sheet Nibbler Cutter Hole Saw Drill Attachment

Description: 1. There are two cutter heads, adjustable head cutting 2. The cutter head can be positioned 360 degrees in any direction 3. Compaitble with 8mm electric or pneumatic drill, speed 1500-3000 rpm 4. The minimum cutting radius is 12mm 5. Allowable cutting thickness: Ordinary iron plate: 1.8mm Stainless steel plate: 1.2mm Copper and aluminum plates: 2mm Plastic plywood car: 2mm Instructions for use of thin plate hole opener: 1 When equipped with a thin plate hole opener, first insert the front end of the electric drill and the cutter into the round hole of the hole opener, connect the cutter to the electric drill and lock it, and then tighten the three sticks and stigma screws on the shelf. To prevent the hole opener frame from sliding. Insert the ruler rod into the small square hole of the frame with the positioning pin facing up from left to right, and finally adjust and tighten the top screw according to the size of the arc to be cut, and fix the ruler rod firmly to ensure the accuracy of the cutting hole . 2 When cutting standard arcs, a thin plate hole opener should be used to keep the arc cut surface smooth and beautiful. You should also drill a 3 mm positioning hole and then drill a 12 mm hole, and insert the cutter head into the hole. Cut inside and outside circles. Packing List: Cutter*1PCS Wrench*1PCS Note: Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Please allow 1-2cm differs due to manual measurement.