Mmunsd magnetic door stop-small things, easy to use!
Features and benefits
? No drilling required. Use double-sided tape on the door instead of drilling holes (there are 2 3M tapes, a total of 4). Protect your doors and walls from damage.
? Strong magnetic. Easily mount on the floor or wall. Can be used for various occasions such as family, dormitory, office, hotel, cabinet, terrace, camper, front door and so on.
? Hold the door safely and quietly. Especially suitable for families with small children or naughty pets. Convenient for caring for children when the door is open.
Installation Notes
The small round part of the door, the longer part is placed on the baseboard, on the chair railing or on the wall bolt.
Steps for pasting stickers
Step 1: Remove all dust from the surface to be adhered and wait for it to dry completely.
Step 2: Peel off the 3M tape and attach it to the 2 substrates of the door stop.
Step 3: Press the sticker firmly for 1 minute to make sure it sticks tightly.
Step 4: After 1 minute, peel off the outward tape.
Tip: Before use, be sure to remove dust, moisture, oil or peeling paint, press hard and achieve a long-lasting effect after 48 hours.
Screw step
Step 1: Use a M8 electric drill to drill a 28mm-32mm depth hole in the electric drill wall, install expansion bolts and tighten the nuts.
Step 2: Twist the length to remove the base plate, and then screw it into the expansion bolt.
Step 3: Find the right place, and fix the bottom plate with 3 screws.
Tip: If installing on a wooden skirting board, you only need to drill 3 screws to fix the bottom plate, and then tighten the longer part without using expansion agent. The method of mounting on the floor with screws is the same.
<
