Digital Meter Display Motorcycle Gear Indicator for SU&ZUKI GSX750F GSX600F Katana GSX600 F GSX750 F GSX 600 750 F 600F Accessories Gear Display Meter Indicator Meter Display

Features:
Light Color: Red
1-6 Level Gear display
Fitment:
For SU&ZUKI GSF600 Bandit 2000-2004
For SU&ZUKI GSF650 Bandit 2005-2006
For SU&ZUKI GSF1200 Bandit 2001-2006
For SU&ZUKI XF650 Freezing 1997-2004
For SU&ZUKI VL800 intruder Volusia 2001-2004
For SU&ZUKI SV650 1999-2002
For SU&ZUKI GSX1300R Hayabusa 1999-2007
For SU&ZUKI GSX750F Katana 1998-2006
For SU&ZUKI GSX600F Katana 1998-2006
For SU&ZUKI GSX-R750 1996-2004 (Not fit 2000)
For SU&ZUKI GSX-R600 1997-2000 K1 K2 K3
For SU&ZUKI DL650 Vstrom 2012-2019
For SU&ZUKI DL650XT Vstrom 1999-2002
For SU&ZUKI TL1000 R/S 1998-2003
For SU&ZUKI VL1500 intruder 2013-2017
For SU&ZUKI VZR1800 2011-2019
For SU&ZUKI intruder c1500 2013-2017
For SU&ZUKI Boulevard c90 2013-2019
For SU&ZUKI GSX250R 2018-2019
For SU&ZUKI GSX1000F Katana 2019
For SU&ZUKI GSX1400 2001-2009
For SU&ZUKI GSXR1000 2001-2016
For SU&ZUKI GSXS750 2015-2019
For SU&ZUKI GSXS750Z 2018-2019
For SU&ZUKI GSXS1000 /F/A/FA 2015-2019
For SU&ZUKI GSXS1000Z 2018-2019
Locate the Speed Sensor connector:
The Speed Sensor is usually mounted on the front sprocket cover, and the 3-pole black speed sensor coupler is situated 20-40 cm (8"-16") away from sensor.
The connector is accessible by raising the fuel tank, removing the or a side fairing.
Confirmation:
1. Separate the Speed Sensor connector (you might need to use a small flathead screwdriver to get the connector apart).
2. After separating the Speed Sensor connector, plug in both the male and female 3-pole GFYSHIP harness connectors. Make sure the connectors are fully seated.
3. Find the wire that comes from the Signal generator (Pickup coil / CKP sensor).
If in doubt, check the bike's Service Manual or ask your dealer.
4. Connect the Green wire to this wire