Digital LCD Waterproof Inductive Gasoline Engine Hour Meter -Blue-

It is a basic inductive hour meter,designed for any kinds of 2 stroke and 4 stroke small gasoline engines.It only records the total running hours of the engines.The total running hours is not resettable. Description: 1.Hour glass symbol appears and flashes on/off to indicate counting time. 2.Records and Displays to 99,999 hours.Stand-by time up to over 45,000 hours. 3.Resolution 0.1 hour between 0.0-9999.9H. 1 hour between 10000-99999H. 4.The total running hours will always be displayed in the LCD screen,the LCD screen can't be shut off. 5.It is waterproof design,completely waterproof IP68. Application:Any gasoline engines 2 stroke and 4 stroke,like motorcycle,motocross,pit bike,ATV,lawn mower,glider,generator,marine,boat,snowmobile,grinding machine,chainsaw,ramming machine and so on. Installation: 1.Insert one terminal of the inductive cable into the groove of the back side of the hour meter,please make sure that the inductive cable is under the bottom of the groove,and it is not easy to loosen. 2.Find a suitable place to install the hour meter.You have to check the installation place if it is too hot,the temperature can't be more than 65°C.Then please check the distance from the spark plug wire can not be more than 1m,otherwise it is not enough long to wrap the spark plug wire.At last,you need to check if the place is easy for you to view. 3.There are two installation ways.One is use the two screws,you need to drill two holes,then fixed by the two screws.Another way is use the 3M tape,which is much more easier. 4.Wrap the inductive cable to the engine spark plug wire.Please note that must wrap 5 circles or more,then fixed by the two zip ties.Please make sure the inductive cable is very firmly fixed. 5.The cable length can be adjusted by yourselves.