diewu RJ45 to RS232 RS485 RS422 Industrial Male Converter TCP/UDP Serial RS232 RS485 to Ethernet Device Server

Description:  Model number: TXB038 Chipset: IP210 Port number: 1 port 10/100M Auto MDI-MDIX RJ45?1port RS232,1port RS485/422 Standard: IEEE 802.3?IEEE 802.3u?IEEE 802.3x?IEEE 802.3az Network media: 10Base-T,cat3 or above UTP,10Base-Tx,cat5 UTP Data rate: 10/100M Forwarding rate: 10 Mbps / 14,880 pps ,100 Mbps / 148,800 pps LED Indicator: Link/Act, Power, System, TX/RX Baud rate: 110bps~256000bps Operation modes: TCP Server, TCP Client, UDP Dimension: 86*84*25mm Power Input: DC9V-54V Power Consumption: Max1.8W Environment Operating Temperature: -10 ?-55 ? Relative Humidity: 10%-90%(non-condensing) Storage Temperature: -40?-85? Relative Humidity: 5%-90%(non-condensing) Other functionRS485 support full duplex and half duplex Build load default key    3.1 Device Default Parameters:  ID: admin Password: system IP address: 192.168.2.1 Operation mode: TCP server Transmission Mode: RS232 Baud rate: 57600bps UART parameters: 57600,8,N,1 Local port TCP:23 UDP:21    4?Load default  1. Power off the device 2. hold the load default button. 3. power on the device, hold the button for 10 seconds, then release default button