DieseRC DC 12V 24V 4CH Wireless Remote Control Switch DC 6-30V 10A 4-Channels 433Mhz Radio Frequency Relay Receiver with 2 RF Transmitters for Lights Garage Door Motor Awning

Package Include: 1x Relay Receiver board (include shell) 2x Transmitters (contain battery) 1x Product manual Parameter: -Receiver Working voltage: DC 6~30V -Input/Output voltage: 1~250V -Quiescent Current: <5MA -Max current: 10A -RF frequency: 433MHz -Working temperature: -30~+80 -Receiving Sensitivity: >97dbm -Amount of storage remote controls: 20 pieces -Support encoding: 1527 Leaning code -RF Operating mode: ASK superheterodyne wireless reception -Receiving range: Open space is more than 50 meters -Pin: COM,NO,NC - Operating mode: Momentary /Toggle/ Latched Mode -Battery: 2x CR2016(included) Usage(Operation Mode): Momentary Mode: 1. Press and hold one button, one relay will turn on; 2. Release the button, this relay will turn off. Toggle Mode: 1. Press button “A”, relay “1” will turn on; 2. Press button “A” again, this relay “1” will turn off. Latched mode: 1. Press button “A”, relay “1” will turn on; 2. Press button “B”, relay “2” will turn on, at the same time relay “1” will turn off. Reset: Press the learning button (on the Receiver) 8 times. succeed. Note: After reset all the remote controls cannot work anymore. Setup 1. Press the learning button (1 time for Momentary mode, 2 times for Toggle mode, 3 times for Latched mode). Wait for 3 seconds; 2. Press button “A” . Succeed. Note: This item has already been set up in toggle mode. If you want to change the operation mode please reset firstly.