DieseRC 433Mhz Wireless Remote Control Switch AC 110V 120V 240V 220V 30A Relay Receiver with 2 Transmitters for Light Water Pump Household Appliances Farm Irrigation and Electrical Equipment

Package include: 1x Relay Receiver 2x Transmitters (contain battery) 1x Product manual Parameter: -Receiver Working voltage: AC 85V~240V -Quiescent Current: <5MA -Max current: 30A -RF frequency: 433MHz -Working temperature: -30~+80 -Receiving Sensitivity: >97dbm -Amount of storage remote controls: 20 pieces -Support encoding: 1527 Leaning code -RF Operating mode: ASK superheterodyne wireless reception -Receiving range: Open space is more than 50 meters -Pin: N/L - Operating mode: Momentary /Toggle/ Latched Mode -Battery: 2x CR2016(contain) Usage: Momentary Mode: 1. Press and hold one button, relay “1” will turn on; 2. Release the button, this relay “1” will turn off. Toggle Mode: 1. Press button “A”, relay “1” will turn on; 2. Press button “A” again, this relay “1” will turn off. Latched mode: 1. Press button “A”, relay “1” will turn on; 2. Press button “B”, relay “2” will turn on, at the same time relay “1” will turn off. Reset: Press the learning button (on the Receiver) 8 times. succeed. Note: After reset, all the remote controls cannot work any more. Setup 1. Press the learning button (once for Momentary mode, twice for Toggle mode, triple for Latched mode). Wait for 3 seconds; 2. Press button “A” . Wait for 3 seconds. 3. Press button “B” . Succeed. Note: This item has already been set up in latched mode. "ON" button for turn on, and "OFF" button for turn off