DieseRC 433Mhz Universal Wireless Remote Control Switch DC 12V 1CH RF Relay Receiver Module with 2 Transmitters, EV1527 Learning Code Smart Home Remote Switch

Was: $89.88
Now: $44.94
(No reviews yet) Write a Review
SKU:
ZDT909194
Condition:
New
Availability:
Free Shipping from the USA. Estimated 2-4 days delivery.
Adding to cart… The item has been added
Package include: 1x Relay Receiver 2x Transmitters (contain battery) 1x Product manual Parameter: -Receiver Working voltage: AC 5V~36V -Quiescent Current: <5MA -Max current: 10A -RF frequency: 433MHz -Working temperature: -30~+80 -Receiving Sensitivity: >97dbm -Amount of storage remote controls: 20 pieces -Support encoding: 1527 Learning code -RF Operating mode: ASK superheterodyne wireless reception -Receiving range: Open space is more than 50 meters -Pin: N/L - Operating mode: Momentary /Toggle/ Latched Mode -Battery: 27A 12V(contain) Usage(Operation Mode): Momentary Mode: 1. Press and hold one button, relay “1” will turn on; 2. Release the button, this relay “1” will turn off. Toggle Mode: 1. Press button “A”, relay “1” will turn on; 2. Press button “A” again, this relay “1” will turn off. Latched mode: 1. Press button “A”, relay will turn on; 2. Press button “B”, relay will turn off. Reset: Press the learning button (on the Receiver) 8 times. succeed. Note: After reset, all the remote controls cannot work any more. Setup 1. Press the learning button (4 times for Momentary mode, 2 times for Toggle mode). Wait for 3 seconds; 2. Press one button. Succeed. Setup latched mode 1. Press the learning button 3 times. Wait for 3 seconds; 2. Press button “A” . 3. Press button “B” . Succeed. Note: This item has already been set up in latched mode. "A" button for turn on, and "B" button for turn off.