Design House 784751 Pro Scroll/Ball Entry Lever, Satin Nickel

The Design House 784751 Scroll/Ball Keyed Entry Lever accepts a key on one side of the lock but is operated by a lever on the other side. Finished in satin nickel and designed for left or right hand doors, this knob and keyway fit the two most common backsets in the U. S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry levers are often used on front doors and back doors. Use this lockset on standard 1-3/8-inch and 1-3/4-inch thick doors. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI Grade-3 certified, which means this kit is rated for residential security. KW1 Keyway with entry lock KA4 - 4 keyed alike per cut case. The Design House 784751 Scroll/Ball Keyed Entry Lever comes with a limited lifetime mechanical and a 5-year finish that protect against defects in material and workmanship.