Degraw - 4 pcs 50kg Load Cells and HX711 Combo Pack Kit | Load cell amplifier ADC weight sensor for Load cell Arduino | Bathroom scale kit

Package contents: 4 x Load cell 0-50KG 1 x HX711 24BIT Precision ADC Module on breakout board 10 x Breakaway header pins for HX711 connection Everything you need to take accurate force measurements with and Arduino, Raspberry Pi, or other microcontroller in one complete package! Information Load cell - Sturdy steel construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-50kg (0-100 lb). HX711 - This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any microcontroller (like an Arduino or Raspberry Pi). Load cell specs: -300 mm (12 in) wire leads pre-attached -Dimensions 7.8 mm high, 34 mm wide, 45 mm long HX711 specs: -Operation Voltage: 2.7V–5V -Operation Current: -Selectable 10SPS or 80SPS output data rate -Mounted on breakout board -Includes breakaway headers for connection, soldering required Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Bathroom-Scale-With-50-Kg-Load-Cells-and-H/ https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide https://github.com/aguegu/ardulibs/tree/master/hx711 HX711 datasheet: https://cdn.sparkfun.com/datasheets/Sensors/ForceFlex/hx711_english.pdf https://www.youtube.com/watch?v=nGUpzwEa4vg