DC12v Solar Hot Water Heater Circulating Pump Brushless Motor Water Pump Submersible Pump Preservative Low Noise Brushless Motor Water Pump
Features:
The water pump is only suitable for water circulation, not for water pressurization, submersible installation (only for cold water) and completely waterproof.
Motor stator and circuit board part of the epoxy resin potting and completely isolated with the rotors to solve the long-term submersible diving water pump problems, can be installed underwater and completely waterproof.
The pump adopts high performances ceramics shafts, high precisions, good shock resistance. Built-in DCbrushless motor run smoothly, no electric low noise and long service life.
Because the pump adopts the ceramics sleeve and the ceramics shafts precisions cooperation, the noise is lower than 35 decibels, the power smaller even can reach 30 decibels,almost mutes effect.
Application: Water circulation system, refrigeration system, solar thermally system, pipe circulation for water heater, water dispenser, floor heating, fountains, etc.
Specifications:
Material: Plastic+Metal
Size: Approx. 9x6cm/3.54x2.36inch
Voltage:12VDC
Fluid Temperature:0 ~ 110?
Usage Time:more than 40,000hours
Current: 0.7A
Inlets/Outlet: male theads.
Maximums Flows Rate: 8L/minutes(2.1GPM)
Water Head: 3metre/9.8ft
Maximums circulating water temperature: 100°C/212°F.
Can't be immersed in 100°C/212°F hot water
Low noise: 30db at 1 metre
Package Includes:
1x Pump
2x Brass Coupler
2x Stainless Steel Clamp
Note:
Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Features:
The water pump is only suitable for water circulation, not for water pressurization, submersible installation (only for cold water) and completely waterproof.
Motor stator and circuit board part of the epoxy resin potting and completely isolated with the rotors to solve the long-term submersible diving water pump problems, can be installed underwater and completely waterproof.
The pump adopts high performances ceramics shafts, high precisions, good shock resistance. Built-in DCbrushless motor run smoothly, no electric low noise and long service life.
Because the pump adopts the ceramics sleeve and the ceramics shafts precisions cooperation, the noise is lower than 35 decibels, the power smaller even can reach 30 decibels,almost mutes effect.
Application: Water circulation system, refrigeration system, solar thermally system, pipe circulation for water heater, water dispenser, floor heating, fountains, etc.
Specifications:
Material: Plastic+Metal
Size: Approx. 9x6cm/3.54x2.36inch
Voltage:12VDC
Fluid Temperature:0 ~ 110?
Usage Time:more than 40,000hours
Current: 0.7A
Inlets/Outlet: male theads.
Maximums Flows Rate: 8L/minutes(2.1GPM)
Water Head: 3metre/9.8ft
Maximums circulating water temperature: 100°C/212°F.
Can't be immersed in 100°C/212°F hot water
Low noise: 30db at 1 metre
Package Includes:
1x Pump
2x Brass Coupler
2x Stainless Steel Clamp
Note:
Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
