Dash Cam 1080P FHD 3 Inch IPS Screen Metal Shell Dash Camera for Cars,Car DVR Dashboard Recorder Super Night Vision,170°Wide Angle,WDR,G-Sensor,Loop Recording,Motion Detection,Parking Monitor

Dash Cam 1080P FHD 3 Inch IPS Screen Metal Shell Dash Camera for Cars,Car DVR Dashboard Recorder Super Night Vision,170°Wide Angle,WDR,G-Sensor,Loop Recording,Motion Detection,Parking Monitor

$34.99
(No reviews yet) Write a Review
SKU:
JA565721
UPC:
5059116008221
Condition:
New
Availability:
Free Shipping from the USA. Estimated 2-4 days delivery.
What you should attention: 1.Please adjust the sensitivity of G-sensor to Low or turn it off if your monitor shows "card full" even with loop recording function open of this dash cam. 2.The function of built in 300mAh battery is just for emergency recording and save settings. Please keep the dash cam plugged in always, the dual dash cam will shut down after 10 seconds when there is no external power connection. 3.To ensure seamless video recording,please kindly turn off "motion detection" of this dash camera while driving. 4.If you want screen off but dash cam still keep recording, just choose" screensaver" in setting, dashcam will keep recording as normal. ?Because the sensitivity of G-sensor ,we suggest set low level and trun off motion detection ,parking monitor while driving . ?The internal battery is small capacity for backup only. You need plug the car charger while use it; ?Please format SD Card (Not Included, Class 10, 32GB max SDHC card) on your dash cam before using and format SD Card every 15 days; SD card is not included, please purchase a memory card separately. ?It require a name band Class10 or higher micro SD card,Format your SD card on the camera first before using. ?Record Do not remove the TF card during the recording process. ?For cleaning, wipe gently with a soft cloth. Do not use any chemicals for cleaning. ?In case of overheating, unwanted smoke or unpleasant smell from the device, unplug it immediately from the power outlet to prevent hazardous fire. How to install: Remove dirt from the windshield and bracket suction cups before installing the bracket. 1. Install the suction cup on the camera. 2. Place the suction cups in parallel on the windshield of the car. 3. Press the suction cup firmly against the windshield and push the bracket down firmly<
!