DAP 100 Silicone Rubber Window Door and Siding Sealant Clear 9_8 fl oz 6-Pack

(6-Pack) For caulking and sealing around windows and doors, gutters and vents, siding and trim, and molding. Adheres to glass, ceramic, fiberglass, porcelain, non-oily woods, canvas, most metals, plastics and rubbers and painted surfaces. Provides a watertight, flexible seal that won't crack, crumble or shrink. Once cured, its unaffected by temperature extremes (negative 40-degrees to 400-degrees Fahrenheit. Meets ASTM specification C 920, Class 25, Type S, Grade NS. Covers 56 lin. ft. at a 3/16" bead size. DAP 100% Silicone Window, Door and Siding Sealant is an all-purpose, 1 component acetoxy cure sealant. It provides a watertight, flexible seal that won't crack, crumble or shrink. It is ideal for caulking and sealing around windows, doors, siding, trim, gutters, vents and molding. Product Application 1. If using squeeze tube, remove cap & cut nozzle at 45º angle to desired bead size. Unscrew nozzle & remove foil seal. Replace nozzle. 2. Is using cartridge, cut nozzle at a 45° angle to desired bead size. Puncture inner foil seal. Load into caulk gun. 3. Fill gap or crack with sealant. 4. If necessary, tool or smooth the bead of sealant with a finishing tool before the sealant skins over. 5. Allow sealant to cure for at least 12 hours before exposing to water. 6. Do not touch or clean sealant for 24 hours. Sealant reaches full cure in 24 hours. 7. Clean up excess uncured sealant from surface and tools with mineral spirits. Scrape or cut away excess cured sealant. Do not use mineral spirits to clean hands or skin. Wash hands or skin with soap and water. 8. Sealant is not paintable. Paint surfaces prior to applying sealant. 9. Reseal cartridge/tube for storage and reuse.