DAHAN 1 Pound Lead Free Solder Wire (Sn99.3 Cu0.7) with Rosin Core for Electrical Repair Soldering and DIYs (Diam: 1.0mm/0.04", 1 pound)

DAHAN Lead Free Solder Wire (Sn99.3 Cu0.7) with Rosin Core for Electrical Repair Soldering and DIYs *Specifications: Lead Content: lead free, RoHS Compliant Material Compositions: Sn: 99.3% Cu: 0.7% Flux: 2% Melting Point: 220/ 428 Diam: 0.5mm, 2.65oz. Gross Wt: 3.1oz. Length: 48m/52.5yards Diam: 0.8mm, 2.65oz. Gross Wt: 3.1oz. Length: 19m/20.8yards Diam: 1.0mm, 2.65oz. Gross Wt: 3.1oz. Length: 12m/13.1yards Diam: 0.5mm, 1 pound Gross Wt: 1.03lb. Length: 288m/315yards Diam: 0.8mm, 1 pound Gross Wt: 1.03lb. Length: 114m/124.7yards Diam: 1.0mm, 1 pound Gross Wt: 1.03lb. Length: 72m/78.7yards *Package includes: 1x DAHAN Solder Wire Spool *Note: Lead-free solder has a higher melting temperature, which may require a higher temperature tip, depending on your iron. *Soldering Tips: 1. Heat up the soldering iron. 2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder. 3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start. 4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second. 5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need. 6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint. 7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.