It's a universal fit cooling fan. Make sure the fan size is correct with your original. Puller/Pusher Puller fans mount on the engine back side of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out of the back side of the radiator.
?Please note that the factory default setting for our products is puller fans. Pusher fans mount on the front grille side of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core and exits out the back side of the radiator.
Easy to install
Step 1: Open the hood of the car and remove the intake pipe above the cooling fan so that the fan can be removed smoothly.
Step 2: The heat dissipation fan and air conditioner fan are located above the fan frame. Use a professional tool to unscrew the four screws on the four corners and remove the cooling fan from the vehicle.
Step 3: Install the new cooling fan correctly on the new fan frame, and secure the screws at the four corners.
Step 4: Check for errors at boot and install intake pipe in correct position.
Step 5: Tighten the intake pipe fixing screws, close the hood, and verify that the new radiator fan is working properly. All operations are complete.
How to choose the right fan size?
Step 1:Confirm the width and depth of your radiator
Step 2:Compare the fan diameter and depth with radiator
Step 3: Choose the right size fan
