Creative3D Glass Bed Heated Bed Build Surface 3D Printer Build Plate Carbon Silicon Crystal Glass Print Bed RepRapCTCANET 310x310x4mm Glass Bed Platform for CR10 3D Printer Accessories

Creative3D Printer Glass Bed ?The edges are round and the four corners without sharp edges and safe to use. ?Has a good adhesion texture and does not warp or peel off during printing. ?So easy to slip off after the glass beds they cool. ?Prepare you 4 clips and 4pcs MK8/0.4 nozzle for free. ?Suitable for ELF, CR-10, CR-10S, Tornado. Specification: Material: Special Glass + Microporous coatings Size: 310x310x4mm Different Filaments Temperature Settings: 1. PLA:50-70ºC 2. Flexible filament: 50-70ºC 3. ABS:100-125ºC ( 110ºCis recommended ) 4. PC:100-130ºC ( 120ºC is recommended ) 5. Nylon:90-120ºC ( 110ºC is recommended ) 6. PP:100-130ºC ( 120 ºC is recommended ) 7. PETG: 50-70ºC Package List: 1 x Glass Print Surface 4pcs clips and 4pcs MK8/0.4 nozzle NOTE: ?Do not remove the model immediately from the glass bed with force!This glass bed must come down to room temperature for the advanced surface to "release" the model. ?About clean,you can use a drop of dawn soap on a hot towel and then follow it with a dry towel.