Creality Ender 3 Glass Bed Upgraded 3D Printer Glass Platform Heated Bed Build Surface Tempered Glass Plate for Ender 3-Ender 3 Pro-Ender 5-Ender 5 Pr

About the Glass Plate Upgraded Version for Creality 3D Printer Platform Hot Bed 1. Size: 9.25x9.25x0.16inch/235x235x4mm 2. Material: Borosilicate Glass+Composite Coating 3. Package include: 1 x glass bed; 4 x clips 4. Upgraded Ender 3 Glass Bed, 4mm thick borosilicate glass, stronger and more durable than 3mm thick one. Hardness of 8 Mohs, heat resistance up to 400 ?. 5. Glass Bed with extremely high flatness greatly solves the problem that the 3d printing platform is not flat enough. If you have a higher requirement for print accuracy, it is a perfect choice to use a glass plate instead of magnetic mat or pei sheet. 6. The same installation holes as the standard MK2 and MK3 hot bed, and it’s compatible with almost all 3D printers with MK2 and MK3 hot bed. Temperature Settings for Different Filaments: 1. PLA:50-70ºC 2. Flexible filament: 50-70ºC 3. ABS:100-125ºC ( 110ºCis recommended ) 4. PC:100-130ºC ( 120ºC is recommended ) 5. Nelon:90-120ºC ( 110ºC is recommended ) 6. PP:100-130ºC ( 120 ºC is recommended ) 7. PETG: 50-70ºC NOTE 1. Clean with alcohol or acetone when the glass build plate cools down to room temperature, gently rub the surface, not shovel or scrape. 2. As the print has finished, do not try to remove the print from the glass bed with force immediately. This glass bed must come down to room temperature for the coating surface to "release" the print. Forcibly removing the print from the glass bed at high temperature will damage the proprietary surface. 3. The glass plate is thicker than the magnetic build surface, please adjust/recalibrate your 3d printer's Z-height before any print operating to avoid extruder nozzle scraping the glass bed. 4. Please remove the plastic film from the glass bed before use.