Coolerguys Programmable Thermal Controlled Cooling Kits for Cabinets AV and Components Plastic Single 80mm

All parts in our kits come with a 3-year replacement warranty at no cost to you This particular *kit is for a single fan unit meant to cool your cabinet, multimedia center, aquarium, home grow op, brewing project or whatever else that may need cooling, the only limit is your imagination! This kit can move 20 cubic feet (WxHxD) of air per minute (CFM)

Can be mounted on any side of a cabinet, where room permits (cutout dimensions below). Insert completed cooler assembly in the hole and attach with appropriate screws. The fan can be set to be either an intake or exhaust, simply mount the fan to the bracket pointing in the desired direction before installing (if you are looking at the label the air will flow towards you) If you need additional information you can contact us! Completed Fan and Bracket Dimensions when assembled using the included parts: Acrylic: 4.25" x 4.25" x 1.50" (108 x 108 x 40mm) Cutout size: Acrylic: 3.25" x 3.25" / 85 x 85mm Total Kit Contents: (1) Coolerguys 100-240V AC to 12V & 5V DC Power Supply With 4pin Molex (1) Coolerguys Ultra Quiet 80x80x25mm Dual Ball Bearing Low-Speed Fan (1) Coolerguys Programmable Thermal Controller with LED Temperature Display (1) Bracket of your choosing (Acrylic or Metal) (4) Black 80mm Wire Fan Grill (8) Fan nuts and bolts (4) #6 - 1/2" black Cabinet screws *This is a kit and some assembly is required. Fan Specifications:: 1500 RPM Operation Voltage: 6.5~13.8 Volts Input current: 0.08A Operation temperature: -10 to +65 C Storage temperature: -40 to +70 C RPM: 1500 +/- 10% CFM: 20 dB: 17 Connector: 3 Pin w/ 30" Tail Life: 50,000 hours (Nearly 6 continuous years) Lifespan is based on the operating temperature of 95F (35C)