Controller Charging Dock for Xbox Series X Xbox Series S Xbox-one S and Xbox-one X with 800mAh Battery Pack and Battery Cover MENEEA Dual Charger Stand Station Accessories with Charging Cable

About MENEEA Charger Stand Instructions for Use: 1.Connect the USB cable to a device with a standard DC 5V USB output or the transformer interface. 2.Then connect the MICRO plug of the USB charging cable to the MICRO input port behind the dual charging dock of the product. 3.Finally, put the controller with the battery pack installed into the charging slot of the dual charging dock of the product (note that the controller is facing the front, placed upside down, and centered horizontally. So that the contact pins on the charger are facing the two golden hardware of the batter pack). After the controller is placed correctly. The battery pack on the controller can be charged. 4.When the dual charging dock of this product ischargingthe battery pack on the controller, the charge lamp oresponding to the charging slot would light up (blue), According to the residual power of the battery pack on the controller, the normal full charge time is about 2-4H. 5.The charge lamp of this produet is a single light with blue, and the charge lamp lights up, indicating that the controller isnormally connected to the power supply of the dual charging dock and it is charging normally, and the charge lamp will go out when the battery pack on the controller is fully charged. 6.The controller needs to be taken out from the dual charging dock of the product after charging is completed. 7.This product can simultaneously charge two controllers battery pack installed. 8. When charging the controller by this product you must use the battery pack configured with this product + the battery cover with the corresponding model. NOTE: 1: This product does not contain controllers. 2: Please charge it with a charger rated at 5V, 1A or higher current. Package Contents: 1* Dual charging dock 1* Charging cable 2* Battery