Feature:
1. The drainage pump is mainly used to remove contaminated condensate, and is used in air conditioning systems and refrigeration equipment.
2. The air conditioner drainage pump has a rate of 24m³/h and a maximum lift of 12 meters, can run with low noise and is safe and stable.
3. Circuit board sealing treatment, not affected by humid environment, better heat dissipation effect.
4. Electrode type water level sensor solves the failure problems of traditional float water level sensor such as water absorption and jamming.
5. The condensate pump for air conditioner has complete accessories, easy to assemble, and wall?mounted installation can save space.
Specification:
Item Type: Air Conditioning Drain Pump
Model: M1
Material: Engineering Plastic
Purpose: Air conditioning pump
Voltage: 110-240V 50-60HZ
Maximum Recommended Head: Approx. 12meters / 39.4ft
Rate: 24m³/h
Pumping Capacity: 24L/h
Working Steam Consumption: 24L/H
Suction Pressure: 2kpa
Working Steam Pressure: 2mpa
Applicable Maximum Cooling Capacity: 30000btu/h (within 3 horses)
Water Storage Capacity: 200ml
Noise at 1 Meter: 19dB(A)
Drive Mode: Electric
Performance: Automatic
Delivery Medium: Clean water pump
Installation Method: Wall-mounted
Operating Temperature: 0-50?
Package List:
1 x Condensate Pump
1 x Connection Line
2 x Screws
2 x Expansion Screws
1 x Buckle
1 x Cable Tie
1 x User Manual
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
1. The drainage pump is mainly used to remove contaminated condensate, and is used in air conditioning systems and refrigeration equipment.
2. The air conditioner drainage pump has a rate of 24m³/h and a maximum lift of 12 meters, can run with low noise and is safe and stable.
3. Circuit board sealing treatment, not affected by humid environment, better heat dissipation effect.
4. Electrode type water level sensor solves the failure problems of traditional float water level sensor such as water absorption and jamming.
5. The condensate pump for air conditioner has complete accessories, easy to assemble, and wall?mounted installation can save space.
Specification:
Item Type: Air Conditioning Drain Pump
Model: M1
Material: Engineering Plastic
Purpose: Air conditioning pump
Voltage: 110-240V 50-60HZ
Maximum Recommended Head: Approx. 12meters / 39.4ft
Rate: 24m³/h
Pumping Capacity: 24L/h
Working Steam Consumption: 24L/H
Suction Pressure: 2kpa
Working Steam Pressure: 2mpa
Applicable Maximum Cooling Capacity: 30000btu/h (within 3 horses)
Water Storage Capacity: 200ml
Noise at 1 Meter: 19dB(A)
Drive Mode: Electric
Performance: Automatic
Delivery Medium: Clean water pump
Installation Method: Wall-mounted
Operating Temperature: 0-50?
Package List:
1 x Condensate Pump
1 x Connection Line
2 x Screws
2 x Expansion Screws
1 x Buckle
1 x Cable Tie
1 x User Manual
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
