Compatible with iPhone 7 Screen Replacement Black 4.7 Inch Full Assembly LCD Display Digitizer with Front Camera, Ear Speaker, Proximity Sensor and Repair Tool Kit (A1660, A1778, A1779)

Flylinktech is specialized in iPhone screen supplying business for many years with best repair replacement parts.

The iphone 7 lcd screen replacement was pre-assembled that includes front camera, ear speaker, proximity sensor, LCD metal back plate, without home button. Convenient for replacing and installing, Saving time & reducing risk and everything will be working normally that you seem to be getting to a new phone.

Package Includes:

1 x iPhone 7 Screen Replacement Full Assembly

1 x 4.7 Inch Screen protector

1 x Pentalobe Screwdriver

1 x Philips Screwdriver

1 x Plastic Opening Tool

1 x Triangle Pry Pick

1 x 3M Adhensive

1 x Sim Card Pin

1 x Suction Cup

Notes:

1. Make sure your phone is powered off first before installation.

2. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.

3. Because of the screws have long or short ,so please be carefully do not put the screw in the wrong place or it will damage the screen.

FAQ:

1. There are lines across the screen.

Solution: Remove the LCD screen and clean the connectors. Lines are normally because those flex cables are not well seated in or some dust in the connectors.

2. Screen won't turn on but all cables are connected well.

Solution: Reset the phone by holding both Power and Home button together pressed for 15 seconds.

3. Touch does not working properly.

Solution: The problems are caused to cables damage. Check all cables to find if there is any damage or crease on the flex cables.

4. If you still can't solve the problem, please contact our email at any time, we will try our best to help you and reply you within 24 hrs.