Command Mini-Hooks, White, 36-Hooks

Details6 per pack + 3 packs= 183m command hooks. 8 Small strips. Holds on strong. 3m command adhesive comes off cleanly. No surface damage. Each Hook Holds: 225g; 1/2 Lb. 3m command products Made in USA.DirectionsFollow instructions carefully! Save instructions for clean removal in the future. To Mount the Hook: Clean Surface - Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. Apply Strip - Remove red Command Adhesive liner. Align square end with edge of hook. Press firmly - Remove black wall slide liner. Position hook and press entire hook firmly for 30 seconds. Wait 1 hour before use. To Remove Hook: Grab Removal Tab: To prevent hook from snapping your fingers, hold hook as shown. Do not press against wall. Slowly slide the tab straight down against the wall stretching the strip at least 6 inches (15 cm) until hook releases from the wall. Never pull the strip out at an angle. Strip could break or damage the surface. Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).