Specification:
Length: 24 Inches
long lifespan : ?50,000 hours
LED Type: SMD 3014
Waterproof: IP68
Features:
- It can be installed without open the car headlight assembly.You can easily paste it using adhesive tape to the outside or inside of the headlight assembly. No need to drill, screw or disassemble.
- Dual color white / sequence amber switchback function LED strip.
- Can be bent, twisted, and contoured to fit most headlights.
- DRL driving light and turn signal light-work as a daytime running light with white light and work as a turn signal light with following yellow light.
- Environmental-friendly, energy saving, shock-proof and vibration resistant.
For Car Light Modification:
It can also be used as lightings around headlight lamp, tail stop brake light, fog light or under the bumper to give your vehicle an impressive look as LED daytime driving/running lights (DRL) such as the latest for Ford,Chevrolet,Toyota or Honda.
This LED strip light tube also can be used for boat, motor, cabinets, tables, chairs, stairs, and anywhere you want, it will add aesthetic appeal.
Installtion:
There are 3 cables, YELLOW RED and BLACK
1. the Black connect to ground line
2. the Yellow connect to turning cable - the led strip shows flowing amber(yellow) light
3. the Red connect to running cable - the led strip shows white light
Tips for your cutting DIY installation:
1. Power off during your customizing installation
2. Make 3-Leds as a team and cut every 3-LEDs
3. Make sure no debris gets in
4. Sealing the tube with insulated glue after cutting in short?light tubes cannot be folded
Attention:
Strips can be cut, but don't stress the cables or bent too much, that will make some LEDs dont light up.