CITRISTRIP Paint and Varnish Stripper and Remover 17 Oz

DIRECTIONS FOR USE: 1. Protect hands with chemical-resistant gloves and eyes with chemical splash goggles. Be observant of torn gloves or other accidental skin contact since no burning or stinging sensation is immediately experienced. 2. Allow to warm to room temperature then shake vigorously for 2 minutes. Hold can in upright position approximately 10" to 12" from surface. Point arrow on button away from you and depress to apply a generous, orange coating. 3. After 30 minutes (or up to 24 hours), test a small area to see if finish is softened and ready for removal. Remove loosened finish by gently scraping in direction of wood grain with a plastic stripping tool. For stubborn areas, use an abrasive pad sprayed with CITRISTRIP Paint & Varnish Stripper. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. 4. Use a paint stripper wash to loosen remaining residue and then mineral spirits to prepare surface for painting. Keep out of reach of children