CHPOWER 220x 220mm Print Bed-A plusB- Magnetic Build Surface for WanHao Anet A8- A6 Reprap Mendel MK2- MK2A and MK3 Black

Description: The product is divided into two parts: A (upper)+B(lower) * Part A: The top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role) * Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform, which plays a fixed role) * If it fails to adsorb, please rotate it 90 degrees and try again. Kindly note: 1. This ENDER3 Magnetic Build Surface is rated for PLA filaments ONLY. Any other filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will not prevent your printing from warping. 2. This 3D Printer Heated Bed Cover is not for use with high-temperature printing applications above 70°C. How to use: To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you're ready for the next round of printing.