Description:
This battery charge controller module is suitable for 6V-60V battery use, auto charge, auto power off, and car generator, solar power, wind turbine, electric carSuitable for charging.
Voltage setting method:
Normal stage status (digital tube flash)
The start key can increase the voltage.
The stop key can reduce the voltage.
Set start voltage:
In the general state of the normal voltage display, press the Start key to display the voltage at the charge start value.
Press and hold the start key until the digital tube flashes.Set the charge start voltage with the start and stop keys.
Setting the stop voltage:
In the general state of the normal voltage display, press the stop key to display the charge stop voltage.
Press and hold the stop key until the digital tube flashes.Set the charge stop voltage with the start and stop keys.
Reset:
If you press the start key and stop key at the same time in the general power-on state, the digital tube display 888 and reset will complete normally.
Settings:
If you cannot add a start value, adjust the stop value.
Package included:
1 x Charge Control Module
This battery charge controller module is suitable for 6V-60V battery use, auto charge, auto power off, and car generator, solar power, wind turbine, electric carSuitable for charging.
Voltage setting method:
Normal stage status (digital tube flash)
The start key can increase the voltage.
The stop key can reduce the voltage.
Set start voltage:
In the general state of the normal voltage display, press the Start key to display the voltage at the charge start value.
Press and hold the start key until the digital tube flashes.Set the charge start voltage with the start and stop keys.
Setting the stop voltage:
In the general state of the normal voltage display, press the stop key to display the charge stop voltage.
Press and hold the stop key until the digital tube flashes.Set the charge stop voltage with the start and stop keys.
Reset:
If you press the start key and stop key at the same time in the general power-on state, the digital tube display 888 and reset will complete normally.
Settings:
If you cannot add a start value, adjust the stop value.
Package included:
1 x Charge Control Module
