Charge Regulator Panel Regulator 12V 24V Solar Panel with Solar Display Controller for Solar Battery Tools Dual USB LCD Regulator

Specification: Item Type: Solar Charge Controller Material: ABS Voltage: 12V, 24V automatic adaptation Maximum photovoltaic voltage: 12V, 23V; 24V, 46V Lift charge voltage: 14.4V Float charge voltage: 13.7V (recognized value, adjustable) Electric cut-off voltage: 10.7V (value default, adjustable) Discharge recovery voltage: 12.6V (default, adjustable) Charge recovery voltage: 13V Light control on threshold value: 8V for PV panel (there is a delay for light control on) Light control off threshold value: 8V PV panel (there is a delay for light control off) USB output: 8V USB output 2-way 5V 2.5A(max) Standby current: less than 10mA Working temperature: -35 to +60? How to use: 1 . Connect the positive and negative poles of the battery to the controller as shown in the manual, and the controller will automatically detect the battery voltage. 2. Connect the positive and negative poles of the load to the controller as shown in the manual and be careful not to connect them backwards. 3. Connect the solar panel to the controller as shown in the manual. Packing List: 1 solar charge controller 1 manual Note: 1. This controller is recognized automatically by 12V24V. When installing for the first time, make sure the battery has enough voltage for the controller to recognize the correct battery type 2. The controller should be installed as close to the battery as possible to avoid voltage drop caused by too long wire, which will affect the normal voltage judgment. 3. This controller is applicable to all types of -acid batteries (including vented, sealed, acid-bodied batteries, etc.). If charged lithium batteries need