Chameleon Heat Transfer Vinyl Purple to Green Gradual Transfer Vinyl Roll 12"x40"with Iron and Heat Press Gradient Change Color HTV for T-Shirt

Chameleon HTV Product Details: 1.12" x 20" (30 x 50cm) 2 Sheets/Bundle Colorful Reflective Iron on Vinyl 2.Peel Method: Cool Peel Thickness:0.13mm PET Liner:0.03mm 3.Adheres to: Cotton,Uncoated Polyester,Cotton Blends Fabric Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material. 4.Perfectly transfer your favorite design images to T-shirts,DIY party clothing,garments, bags and other fabrics. How to use: 1.Compatible with Pazzles, Craft ROBO, QuicKutz, Brother ScanNCut, Craft Cutters, Die Cutters, Sign Plotters,etc. 2.Mirror/Reverse your image design. 3.Place vinyl (gloss side) onto cutting mat 4.For this chameleon vinyl, we recommend to set 1 level blade to cutting. 5.Weed all of the excess slowly, leave the delicate design letters or graphics. 6.Make sure the finished product facing the right way once ironed onto your fabric. 7.Lay out the fabric.Place the t-shirt or fabric on a hard, flat clean dry surface. 8.Place a cardboard to protect transferred image onto both sides of t-shirt. 9.Set a heat press machine from 140-150 Degrees Celsius (305-320 Fahrenheit) 10.Press it only for 8-12 seconds at medium pressure. 11.Iron on the vinyl gloss side. Do not use steam iron. 12.Disperse the heat of iron evenly.Consistently apply pressure so the whole image is fully attached and prevent image lifting or bubbling up and cracking. 13. Wait for the vinyl to cool and gently peel off backing after few minutes. Care Instructions: Hand wash your fabric gently with mild detergent Wait 24 hours after application to wash Turn the article of clothing inside before you wash it. No bleach Tips: Be careful not to burn yourself with the iron, and never leave an iron on unattended. We recommend you to perform a test prior.