key parameter
Operating Voltage: 90-175V
Working Frequency: 50-60Hz
Remote Control Distance: More than 20 meters
Support encoding :1527 learning code
Operating mode :1527 remote control
Battery: 2XAAA battery (NOT INCLUDE)
# There is a one-to-one correspondence between the remote control and the receiver
# Include 5 pcs Screw connector, you do not need another tools or accessories to connect the wires
HOW TO USE
(1) Press Light & HI button together (the LED located at the button of the remote control flashes simultaneously) until you hear 3 beep sound from the receiver.
(2) pairing process is completed.
RF Remote Control Clearing/Reset Instructions:
(1) Pick the remote control you wish to reset.
(2) Press the light button 5 times until you hear a long beep
(3) Remote Control resets and are no longer paired with the receiver.
It can work well with led bulb and also incandescent. (no working with CFL bulbs),The receiver does not have the function of Reverse.
If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.
IMPORTANT TIPS
1, Check the dimension of receiver carefully to make sure there is enough space in the canopy of your fan although the receiver is really small size
2, If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together ,The receiver does not have the function of Reverse .
