CCTREE 1-75mm PETG 3D Printer Filament 1kg Spool 2-2lbs for Creality CR-10 Ender 3 Pro Tevo Anet 3D Printer- Tran-Green

CCTREE PETG 3D Printer Filaments are using 100% virgin and environmental friendly resin and colorants. CCTREE does not include any cheap plastic fillers or regrind. The filament is vacuum sealed with desiccant to protect it from moisture. The printing temperature of PETG is higher than PLA. Be sure to print with a heating bed, and in a well-ventilated space. CCTREE is using advanced spooling technique aiming to make orderly wind and tangle-free filament. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm. It is the official partner of Creality CR-10S. Also, It is the " default " recommended filaments for many desktop and industrial 3D printers. It has the following characteristics: Good toughness, high strength, high durability and a capacity to withstand high temperatures. Without nozzle clogging, Easy stick to the hot bed applied with washable glue stick or craft glue Low shrinkage, thermoforming dimensional stability The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere. Diameter: 1.75 mm Default nozzle Diameter: 0.4mm Tolerance: ± 0.03mm Extruder Type: Direct Drive/Bowden Tube Net Weight: 1 kg Layer Height: 0.1-0.3 mm Shipping Weight: 1.2 kg Printing Temperature: 220-240°C (428-464°F) Shipping Size: 21 x 21 x 7 cm Bed Temperature: 50-70°C (122-158°F) Tensile Strength: 50 Mpa Cooling Fan: Required Impact Strength: 7.9 J/m2, Izod Retraction Speed: 30-50 mm/s Surface finish: Glossy & Translucent Retraction Distance: 3-8 mm Spool Size: Diameter 195mm + inner hub 55mm + height 60mm