CAT5e Connector Pass Through RJ45 Connectors Gold Plated 3 Prong 8P8C Ethernet Ends 100Pack

Custom ethernet cables made easier and handly -Simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front -Technician can easily verify the proper wiring order Reliable, compliant performance Pass Through RJ45 Connectors are fully RoSH, UL and FCC compliant and are suitable for use in category 5/5e data networks. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector Reduces the distance between the wire twists and contacts improves performance They work with virtually every model of RJ45 crimper tool and 24AWG cable. Specification: Cat5/5E RJ45 pass through connectors Hole Diameter: 1.0-1.04MM Recommended best fit size for wire(Max Insulated wire OD): 0.93-0.98MM IMPORTANT NOTE: 1.Please straighten the wires and cut it neatly so that pass throught easier 2.Please select suitable connector (If cable diameter is smaller than recommended size, when the cable is crimped, the cable will be biased,resulting in fail. If cable diameter is bigger than recommended size,it can be difficult to pass through.) 3.Please check that individual wire and connector's metal contacts are close contact if cables you made with these connectors failed connection tests. 4.If pins were not completely depressed,please note crimper and the way of using crimper. ?Please do not hesitate to contact us if you have any queries and issues. We are here to help you until you satisfaction.