Car Rear View Camera 20mm HD CCD Backup Camera Waterproof Reverse Camera with Parking Assist Line Mirror Image Night Vision Parking Camera for 12V Car Pickup Mini-Truck RV SUV Minivan Camper

?Wiring Installation? *Please test the rear view camera before routing 20ft video wire from back to front. 1. Find a flat surface(parallel to ground) for mounting camera, then drill a 20mm hole on the middle of car rear bumper. 2.Connect the power wire of parking camera to the DC 12V power of reversing light. 3.Connect the 20 ft RCA video wire of backup camera to the head unit of vehicle. 4.Start the vehicle and gear on reverse to test the camera. 5.Re-install the head unit. The red wire of RCA video cable is reverse trigger cable. It is positive pole trigger. One connects to reverse light lamp power + or turn signal light power +; Another end connects to monitor trigger wire.(usually blue or green color wire) ?Features of Reversing Backup Camera: ? Easy to install ? Night vision ? IP68 Standard Waterproof ? 150 degree wide view angle, decrease blind zone accidents very well ? Wide compatible. Can be installed on most any car and without the need for any extra parts. ?Specifications? Image Sensor: Color CCD Power Supply: DC 12 Volt Video System: NTSC System Horizontal Resolution: 420 TV Lines Effective pixels: 648(H) x 488 (V); Viewing angle: 150 degrees Lens: f: 2.0mm, f: 2.0mm Waterproof: IP68 Working current: 0.1A-0.3A ?Package Included 1 x Reversing Camera 1 x RCA Video Cable(19.7FT/6M ) 1 x Power Wire(3FT/1M) 1 x 20mm Hole Saw 1 x User Manual ?ATTENTON? *This backup camera not included Monitor/LCD/Screen/Display/Radio. *If your head unit without trigger wire, then no need to use RCA video cable trigger wire *If the image on the screen is blurry or flash, please check all your power and video connections. Wrap power and video plugs with electrical tape to insulate from interference.