Calvas 4CH 27MHZ Remote Transmitter & Receiver Board with Antenna DIY RC Car Robot
SKU:AA4246
Features:
SKU: AA4246
Quantity: 1 set
4CH 27MHZ Remote Transmitter & Receiver Board with Antenna for DIY RC Car Robot
Note, The item not include screws, please ready yourself.
Dimensions: TX Board 3.9 * 5.7 cm, RX Board 2.7 * 4.2 cm.
Electronic frequency: 27MHZ
Working voltage: 4.5V for transmitter board, 4.5v-6v for Receiving board .
Output voltage: Output two way voltage about 2v-3.5v, can control 2x motors positive and negative, 1-3V motor can be used.
Features:
(1) the output of the two way voltage may be with difference, when the battery in short power, it may be more obvious. So that it is recommended to take a small voltage alone to do with the steering motor.
(2) The remote control distance, in the case of adequate electricity, no interference, after the correct accessing to the antenna , about 10 meters, the above is for reference only
(3) To improve the sensitivity of the remote control, please give the motor with fire-fighting capacitor
Wiring:
(1) Transmitter board: red line V + wire the power supply positive, black line V - wire the power supply negative, ANT wire antenna.
(2) Receiver board: black line connected to the power supply negative, red line connected to the power supply positive. Yellow and green wire a motor, ï¼2 long lines connect to motor 1,2 short lines connect to motor 2ï¼
1 x 4CH 27MHZ Remote Transmitter & Receiver Board with Antenna for DIY RC Car Robot
Item specifics:
Use: Universal
Model number: AA4246
Channel: 4
Support app: No
Wireless communication: Wire Control
Package: No
Frequency: 27MHZ
SKU:AA4246
Features:
SKU: AA4246
Quantity: 1 set
4CH 27MHZ Remote Transmitter & Receiver Board with Antenna for DIY RC Car Robot
Note, The item not include screws, please ready yourself.
Dimensions: TX Board 3.9 * 5.7 cm, RX Board 2.7 * 4.2 cm.
Electronic frequency: 27MHZ
Working voltage: 4.5V for transmitter board, 4.5v-6v for Receiving board .
Output voltage: Output two way voltage about 2v-3.5v, can control 2x motors positive and negative, 1-3V motor can be used.
Features:
(1) the output of the two way voltage may be with difference, when the battery in short power, it may be more obvious. So that it is recommended to take a small voltage alone to do with the steering motor.
(2) The remote control distance, in the case of adequate electricity, no interference, after the correct accessing to the antenna , about 10 meters, the above is for reference only
(3) To improve the sensitivity of the remote control, please give the motor with fire-fighting capacitor
Wiring:
(1) Transmitter board: red line V + wire the power supply positive, black line V - wire the power supply negative, ANT wire antenna.
(2) Receiver board: black line connected to the power supply negative, red line connected to the power supply positive. Yellow and green wire a motor, ï¼2 long lines connect to motor 1,2 short lines connect to motor 2ï¼
1 x 4CH 27MHZ Remote Transmitter & Receiver Board with Antenna for DIY RC Car Robot
Item specifics:
Use: Universal
Model number: AA4246
Channel: 4
Support app: No
Wireless communication: Wire Control
Package: No
Frequency: 27MHZ
