C.R. LAURENCE TD310P CRL 3M Trizact 3" A10 PSA Polishing Disc

3M Trizact Films - A Cleaner, Long Lasting Abrasive System for Glass Scratch Repair Starter and Professional Kits are Both Easy to Use Five Different Grades to Choose From C.R. Laurence introduced 3M Trizact Abrasive Film to the glass industry. This material uses natural abrasive formed in the shape of small pyramids, and provides uniform layers of abrasive throughout the pyramid. As abrasive particles are exposed and used, they fall down and are flushed away between the pyramids Diameter: 3 in (76.2 mm) Minimum Order: 1 Each This easy-to-use system uses five grades to go from a fine ground finish on glass to absolutely clear! It is perfect for scratch removal, edge finishing and a variety of other applications. No more messy slurries and contamination problems! The potential for this material in your glass fabrication process is amazing! For a small investment, you can purchase equipment and supplies to remove scratches in flat and curved glass, and to create your own finished products, including "high polish" work. 3M Trizact will remove light or deep scratches, scuffs, wiper marks, and stains on a variety of glass surfaces. Makes an old windshield or table top look like new again! 3M Trizact should always be used wet, with plain water. Polish requires using each grade long enough to remove all scratches from the previous grade. If this is not done, small defects will remain in the finished product. When using "high polish clear" (cerium), work surface must be flushed with water between stages to remove loose abrasive.