Briwax Danish Oil, 16 fl oz (500mL)

Briwax Danish Oil is a blend of oils and resins, which seals, feeds and finishes all varieties of wood without leaving a surface film to chip or scratch. Two thin coats are sufficient for most purposes on bare wood, but for kitchen worktops, floors, external doors and tables use four coats, which if applied carefully will give a water-resistant finish, even for hot cups of coffee! A coat of Briwax original wax over the top will give the Danish Oil a satin sheen, if you wish. DIRECTIONS: To achieve a good finish, ensure that the wood is dry and free from contaminants such as grease and wax. Lightly sand, apply Danish Oil liberally with a clean dry rag or brush. When working with new woods, 2 or 3 coats will be necessary. Allow 4 to 8 hours drying time between coats depending on temperature and conditions and sand between coats with fine (240 grit) sandpaper or Briwax 0000 grade steel wool in the direction of the grain. Danish Oil can be over coated with Briwax for a softer sheen. Use mineral spirits to clean brushes.