Box Resin Molds 3PCS Jewelry Box Resin Mold Silicone Trinket Storage Box Resin Molds with Lid DIY Box Epoxy Casting Molds Set in Heart Hexagon Square Shape …

How to de-mold:  You just need to twist the silicone resin molds and release your creation out of your molds after the resin is completely cured. Your piece comes out of the mold easily, no sticking, no tearing while the mold maintains its shape. You can use a silicone molds resin release spray. If you don't have, you may use a baby wipe or a drop of soap mix with a bit of water as a release agent, work it down to the mold, then push the project from the bottom.    Warm Tips:  1.If using epoxy resin, please wait for 36-48 hours to let the resin completely cured. After that you just need to twist the resin mold and take out your artworks. 2.If the time is too short, the artworks maybe come out soft and easy to warp. 3.Please fill them to the top with resin that creates a lip so the lid will fit into place and not move around. Note:  1. Actual color may be slightly different from the image due to different monitor and light effect. 2.Please allow 1-3 mm deviation due to manual measurement. 3.We just provide silicone molds. Please DIY! 4.After squeezing and deforming, just rest for a while,they will return to the original state. 4.After using, please wash them with water, then dry out and keep them in flat, store in a cool place. 5.Please avoid the heat and sharp tool.