Boost Voltage Regulator, DROK Step Up Converter Module DC 10-32V 12V 24V to DC 10-46V 36V 150W CC 8A Constant Current Power Supply Volt Transformer Board

Parameters:  Input voltage: 10-32V  Input current: 16A Max. (exceed 8A please enhance heat dissipation)  Quiescent operating current: 15mA (12V to 20V, higher output voltage will increase the quiescent current)  Output voltage: 10-46V (continuously adjustable)  Output current: 8A Max. (exceed 4A please enhance heat dissipation)  Range of output constant current: 0.3-8A  Adjusting range of turn lights: 0.3-8A  Output power: 90W(natural cooling), 150W(enhance heat dissipation)  Operating temperature: -40°c to +85°c  Working frequency: 380KHz  Conversion efficiency: up to 95%  Short circuit protection: Yes  Input reverse connection protection: None (If need please install diode at input port)  Installation: 4x 3mm screws  Module size: 60x50x20mm  Simple wiring : v-in input, v-out output(terminals don't need solder); easy installation: 4x 3 mm screws. Instructions:  1. Adjusting method of output current:  Firstly, adjust CV potentiometer, set the output voltage to the value you need according to your battery or LED.  Secondly, anticlockwise set CC potentiometer about 30 circles and set the minimum output current, connect LED, then adjust the CC potentiometer to the current you need.  If the module is used for battery charging, please let the battery discharged and connect the output, then adjust CC potentiometer to current you need.  2. Adjusting method of turn lights: Connect a full-charged battery to output port, it is ok if the turn light potentiometer shows red light.  Package Include:  1x DC-DC Boost Converter