Description:
This PDR T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased. The tension puller works well with a tap down hammer when pulling large dents. It's very easy to control, everyone can removal the dent easily by yourself.
Specifications:
Number of Pieces: 19 (1pc T-Bar + 18 pcs Puller Tabs)
Color: Silver + blue
Type: PDR tool set
Package Weight: 1250g
Function: Paintless dent removal
How to use:
1.Clean the dent with a clean wet cloth;2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue;
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Packing lncluded:
18x PDR Glue Pulling Tabs
1x 2 in 1 Dent Removel T Bar Tools
Body Dent Repair Tool-Dent Repair kit with Slide Hammer T bar Dent Puller and 18pcs Glue Puller Tabs for Car Body Hail Dent Removal Dent Remover Automobile Body Repair
Was:
$116.12
Now:
$58.06
- SKU:
- ZC174171
- Condition:
- New
- Availability:
- Free Shipping. Estimated 2-4 days delivery.