Boat Bleed Kit Filler Kit for Seastar Hydraulic Steering Systems -2PCS-

Boat Bleed Kit Filler Kit for Seastar Hydraulic Steering Systems (2PCS) Compatible with the Seastar hydraulic steering system. For refilling your boat's steering system fluid Package Included: A for Seastar Bottle to Helm Tube and a Bridge Tube that connects to for Seastar Bleed fittings. Installation Steps: 1. Attach bottle to helm reservoir (do not pierce bottle)(do not let bottle run empty) 2. Connect bridge tube to bleed fittings on steering cylander and loosen/open fittings. 3. Use helm to pump fluid through system byturning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm. 4. Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed. 5. Note: Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder. 6. Repeat 3-4 as nessasary until no air is visible in bridge tube. 7. Tighten bleed fittings before removing bridge tube.