Bluetooth Selfie Stick Tripod Mini Extendable Selfie Stick with Wireless Remote and Tripod Stand 190 Rotation for iPhone 1111 ProXS MaxXSXRX87 Samsung and Android Phone

Size: 210*33*30mm Material: Aluminum Rod Extended length: 210-745mm Expansion joint number: 5 Battery: CR1632 Battery Capacity: 120mah Weight: 115g Shooting way: Horizontal & Vertical Shooting times: 4000-5000times Standby time: 30-60days USER GUIDE: Step 1: Check the selfie stick Gently open from the top of the box, safely pick up the product, and carefully check that the product is in good condition , Whether the accessories are complete. Step 2: Extend the selfie stick Hold the handle of the tripod at the bottom of the selfie stick with one hand, hold the gripping part of the phone with one hand and pull it out of the snap-fit position, and rotate it to a suitable angle between 90 and 180 degrees, then turn the gripping part of the phone is pulled upward until the telescopic rod is extended to a suitable length. Step 3: Pick up the remote control Slide the remote control up from the handle bracket ring and take out the remote control. If you use the remote control for the first time, first remove the insulation pad of button battery on the bottom of the remote control. Step 4: Bluetooth switch and pairing operation Fix the phone on the phone holder of the selfie stick, press the [Camera button] of the remote control for 2~3 seconds, until the blue light flashes and turn on the Bluetooth pairing mode, open the Bluetooth settings of the phone, search and connect “S2”, after the connection is successful When the blue light is off, you can press the [Camera button] of the remote control to take a photo. Press the [Camera button] for 3~5 seconds, and the blue light flashes 3 times quickly, then the Bluetooth is turned off. Step 5:Tripod operation Tripod at the bottom of the selfie stick and pull the first section of the telescopic rod to the proper position to take a picture using the stand function.