Bitray Professional Tool Chip Extraction Tool PLCC IC Extractor Chip Spring Assisted Extractor Puller Removal Puller Tool

Specifications: Product name: IC Extractor Hot Air Gun IC Extractor Dedicated for desoldering station chips. Material:Steel,Plastic Total Size:100x49mm/3.94"x1.93"(L*W) Available PLCC size: 20 feet to 84 feet. Feature: 1.PLCC package special IC chip ROM extractor, extract the motherboard BIOS special extractor designed for PLCC. 2.The PLCC can be easily taken out of the substrate without damaging any IC conductors. PLCC, PGA, PCLL, DIP packaged IC can be unplugged from SOCKET or PCB. 3. Using handshake, pull up the IC smoothly in the vertical direction (not by force), so that the pulled out IC can get a complete PIN. 4. The densely arranged ICs can be pulled out directly without touching other ICs. 5. ICs of different sizes within 5.5cm of the contact surface can be pulled out in a very short time, the operation is simple and labor-saving. 6.Small hook for easy extracting IC and installation. Instructions: 1.For specific usage, insert the two pins of the pick-up clip from the two notches of the chip socket. 2.Then hold the clip and hold the clip firmly, then the chip can be easily pulled out. 3.For the PLCC packaged chip, due to its special package form, a special chip puller is used to operate it. 4.Use the ROM extractor to clamp one corner and the opposite corner of the BIOS chip, press the extraction clamp, and pull the chip straight up from the socket. 5.Note that it is the corner of the sheet where the non-beveled corner is clamped, and the claw of the extractor should be as deep as possible into the socket. 6.When removing the chip, you need to be very careful. Incorrect handling or improper force may damage the motherboard or the BIOS chip itself.