Birdseye Maple Composite Wood Veneer 10" x 6" raw no Backing 1/42" Thick # 1261

Birdseye Maple composite wood veneer 10" x 6" raw unbacked veneer 1/42" thickness. Composite is real wood veneer that has been dyed and cut in a manner that produces clean, consistent, defect free sheets. Very pretty product. No seams. Ships flat in between thick cardboard. Other sizes and backed sheets are available. A great alternative to natural Birdseye Maple for cost and consistency. Some photos may show other sizes, wet or finished veneer, and customer projects. Nice thickness. Great product. Product code # 1261. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. About pictures : Most pictures have been temporarily wet with denatured alcohol on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments may have been made to show the color as true as possible. A lot of time and effort is spent on picturing accurately. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional finishing products can be used with veneer that is applied correctly.