BEYIMEI PCIE SATA Card 8 Port 6Gbps SATA 30 PCIe Card PCIe to SATA Controller Expansion Card upport 8 SATA 30 Devices Suitable for All PCIE Slots Marvell 88SE9215 575

Product Name: 8-Port SATA3.0 Expansion Card Product Root: Marvell 9215 JMB575 Product Interface: PCI-E 1X Support System: WIN8.x / WIN10 / Windows Server 2008R2 / 2012/2016/2019 / Linux 2.6 .x to 4.x Conforms to Serial ATA 3.0 specification, backwards compatible with SATA2.0 SATA1.0 Follow PCI-Express v2.0 specification and backwards compatible with PCI-Express v1. 0. Supports communication speeds of 6.0 Gbit / s, 3.0 Gbit / s and 1.5 Gbit / s Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i. Supports the AHCI1 .0 mode and IDE mode Native command queue (NCQ) support Support FIS based on port multiplier switch or command switch. Support hot hot swap. Compatible with SATA6G , 3G and 1.5G hard drives System requirements: A PCI Express 1x slot is available that supports 1x / 4x / 8x / 16x Information on the speed description < b r> 1. The best effect can be achieved with the SATA3.0 data cable. 2. The setting of the motherboard BOIS: SATA mode should be changed to AHCI. Although some motherboards are PCIE version 2.0, by default BOIS does not enable gen2 high speed mode, which must be enabled manually. The fastest speed of PCI-E 2.0 is 380-450 m / s. When connected to PCI-E1.0, the speed is only 200-300 m / s. Different computer configurations and SATA SSDs have different speeds. 3. SATA ports slow down when used at the same time. This is not for users looking for speed. They are only used for expansion hard disk interfaces. Packing list 1 x PCIe X1 to 8 SATA 3.0 card 8 x SATA cables 1 x SATA splitter adapter cable (1 to 4 SATA connector) 1 x low-profile bracket 1 x manual 1x 15pin SATA power splitter cable