Berta -2 Pieces- 165 Degree Soft Closing Full Overlay- 3-Cam 6-Way Adjustment- Concealed Frameless Lazy Susan Kitchen Cabinet Door Hinges with Installation Screws

MAIN SPECIFICATIONS * DEPTH OF CUP: 13 mm (1/2”). * CUP DIAMETER: 35 mm (1-3/8). * DRILLING DISTANCE ON DOOR: 3-8 mm (1/8”-1/3”). * FINISH: Nickel Plated. * MATERIAL: Steel. * CENTER-TO-CENTER SCREW HOLE: 35 mm (1-3/8”). * INSTALLATION TYPE: Screw. * CABINET TYPE: Frameless. * SUITABLE DOOR THICKNESS: 16-24mm (3/5”-1”). INSTALLATION INFORMATION 165 Degree Soft Close Kitchen Cabinet Hinge + Frameless Plate Hinge is made from nickel plated steel. Hinge fits into a 35mm (1-3/8") cup drilled in the back of the door. Cup depth is 13 mm (1/2"). The center-to-center screw hole dimensions on the hinge cup are 35 mm (1-3/4"). Door Reveal - the reveal is the gap that is found (when the door is closed) between the edge of the door and the cabinet side panel that the door is hinged to. The reveal dimension is determined by the "bore distance". The bore distance is the distance from the edge of the cup drilled in the back of the door to the edge of the door. You can use any bore distance from 3 mm to 8 mm (1/8" to 5/16"). The center-to-center screw hole dimensions on the hinge cup are 35 mm (1-3/4"). If your current hinge is 1-3/4" or the less common 1-7/8" you can install this hinge without re-drilling the screw holes. For 1-7/8" screw hole dimensions, the screw will go in at a slight angle but usually works without a problem. Make sure to order at least two hinges for each door that you are hanging. ATTENTION We ship within 1 business day after payment is cleared. Please make sure your shipping address is correct and deliverable. You'll have to pay additional shipping cost to re-send package. Lost package due to your address problem will not be re-sent or replaced. Return Items can be returned for refund, less shipping & handling, within 14 days after receiving items. Buyer will be responsible for return shipping cost. Please contact us for return authorization, and returned items must be