BeaSaf Bike Kickstand Non-Slip Adjustable Aluminium Alloy Center Mount Bicycle Kickstand for 22 24 26 Inch Mountain Bike-Adult Bike-Road Bicycle-Sports Bike-BMX-MTB

?NOTE? 1.Please choose the size according to the tire mark. Due to the difference of the frame designs, the height of the frame from the ground could be different even if they are of same sized bikes. So before placing your order, please measure the height of the frame from the ground, make sure it is on the scale of 30-34cm (11-13 IN) 2.This kickstand fits for 22" 24" 26" Bikes, but not suitable for bike size below 22 inch or above 26 inch. Please contact us if you have any questions with the bike kickstand. There are 4 reasons for choosing our bike kickstand. 1.Upgraded quality: Made of aluminum alloy material, with top quality and very strong 2.Fit for most bikes: This bike kickstand for mountain bike, road bicycle, bmx/mtb, city commuter bike, sports bike, adult bike. 3.Don’t worry about tools: Package include 2 wrenchs-----4mm/10mm, 4mm wrench for length adjustment. 10mm wrench for arrangement. 4.Customer Service: 100% customer satisfaction guarantee, 12-month warranty. How to Install This Bike Kickstand? 1.Remove the bigger screws with the 10mm hexagon wrench 2.Align the aluminum alloy sheets with the inner rubber mats to the chain stay tube, then tighten the screws 3.Try to put down the kickstand, and check if the bike is balanced 4.If not, use the 4mm hexagon wrench to loosen the screw in the middle of the kickstand and tighten the screw after adjusting to the appropriate height. TIPS: 1.Pay attention to the position of the kickstand. If it is too far forward, the heel will easily be touched when riding. 2. Don’t twist the screws again after you tightening them, otherwise it is easy to make the thread worn down. <